配置NAT模式下的IP

1、先更改本地适配器，点击“更多适配器”选项，“编辑”

2.配置本主机Windows的IP（192.168.230.129）、子网掩码（255.255.255.0）、网关（192.168.230.2）和 DNS服务（8.8.8.8、144.144.144.144）

3.打开 VMware 编辑 - 虚拟网络编辑器 ，更改如下配置

4.设置对应虚拟机，将网络连接模式改成VMnet8（NAT模式）

5.进入虚拟机系统，设置对应配置

[root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens33 
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="static"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
UUID="7c080a13-ed61-41a5-a107-fe8ecc2ea84f"
DEVICE="ens33"
ONBOOT="yes"
IPADDR=192.168.230.128
NETMASK=255.255.255.0
GATEWAY=192.168.230.2
DNS1=8.8.8.8
DNS2=114.114.114.114
ZONE=public

注意这里的IP不能和现有IP相同，不然会产生冲突

重启网络

[root@localhost ~]# systemctl restart network

看一下目前网络IP是否配置成功（看inet后）

[root@centos ~]#  ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:02:18:76 brd ff:ff:ff:ff:ff:ff
    inet 192.168.230.128/24 brd 192.168.230.255 scope global noprefixroute ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::1e0f:208a:e2b2:613d/64 scope link noprefixroute
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 52:54:00:13:63:43 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN group default qlen 1000
    link/ether 52:54:00:13:63:43 brd ff:ff:ff:ff:ff:ff
5: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
    link/ether 02:42:0d:e4:63:3d brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
       valid_lft forever preferred_lft forever
    inet6 fe80::42:dff:fee4:633d/64 scope link
       valid_lft forever preferred_lft forever
6: br-3d788096b131: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
    link/ether 02:42:9f:75:7d:ef brd ff:ff:ff:ff:ff:ff
    inet 172.18.0.1/16 brd 172.18.255.255 scope global br-3d788096b131
       valid_lft forever preferred_lft forever
    inet6 fe80::42:9fff:fe75:7def/64 scope link
       valid_lft forever preferred_lft forever
8: vethdf09825@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP group default
    link/ether 96:ae:30:02:2d:15 brd ff:ff:ff:ff:ff:ff link-netnsid 1
    inet6 fe80::94ae:30ff:fe02:2d15/64 scope link
       valid_lft forever preferred_lft forever
10: vethf2af17c@if9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-3d788096b131 state UP group default
    link/ether 26:fa:68:45:f6:fd brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet6 fe80::24fa:68ff:fe45:f6fd/64 scope link
       valid_lft forever preferred_lft forever

ping一下能成功上网，完成！

[root@centos ~]# ping tanyde.mc.hi.cn
PING tanyde.mc.hi.cn (103.186.214.51) 56(84) bytes of data.
64 bytes from 103.186.214.51 (103.186.214.51): icmp_seq=1 ttl=128 time=97.1 ms
64 bytes from 103.186.214.51 (103.186.214.51): icmp_seq=2 ttl=128 time=75.7 ms
64 bytes from 103.186.214.51 (103.186.214.51): icmp_seq=3 ttl=128 time=45.7 ms
64 bytes from 103.186.214.51 (103.186.214.51): icmp_seq=4 ttl=128 time=69.3 ms
64 bytes from 103.186.214.51 (103.186.214.51): icmp_seq=5 ttl=128 time=274 ms
64 bytes from 103.186.214.51 (103.186.214.51): icmp_seq=6 ttl=128 time=294 ms